SCHREMS COMPLETE SPOKE SET HUSQVARNA CR/WR 70-71 FRONT 21 INCH

All Schrems spokes are pre-stretched stainless steel and 1000 Nm, thereby expanding the Spoke very little, and the follow is minimized. Nipples are made Steel and nickel plated. Our spokes fit the original wheels, has your other machine Wheels, rims, hubs, so you need to get the exact amount or pattern of spokes Order. Make sure the nipple as well as outside diameter Aluminum nipples are stronger than it can happen that you need to drill holes in the rims and reworked. If in doubt, just send us wheel, we repair, and centering it expertly. Colors according to your desire, almost anything is possible.

HUSQVARNA
CR 250 73-74
WR 250 73-74
CR 400 73-74
CR 450 73-74
WR 450 73-74

This spoke set has 36 spokes with nickel plated steel nipples.
NOTE! This wheel have a very special lacing as you can see on the pictures below. On the sprocket side (right side) there are 2 long spokes and one short spoke used on both inner and outer side of the hub.

For: 18” rear wheel.
Spoke size: 6 spokes of 4x159 mm. Outer and inner spoke on right side. OEM Ref. 15 16 049-11.
Spoke size: 12 spokes of 4x189 mm. Outer and inner spoke on right side. OEM Ref. 15 16 049-01.
Spoke size: 18 spokes of 4x201 mm. Left side. OEM Ref. 15 16 049-02.

Nipple size: 7,6x20 mm matching all rims with holes from 8 to 9 mm. If the spoke nipple holes are smaller or larger you may switch nipples without extra charge against another size.